• Lower manufacturing cost due to less material employed
• Cost of mounting is reduced as no addictional clamps are needed
• Less space required for storage and use
• Lower shipment expenses due to smaller size
• Lower transportation risks

Sell more

• A smaller system leads to more sales

遠心光源

Comparison of precision measurement systems with “classic” telecentric lens and light vs. CORE PLUS telecentric lens and light.

	Optical specs			Electrical specifications							Mechanical specifications
				Device power ratings				LED power ratings			Dimensions
Part number	Light color, wavelength peak	Minimun beam shape dimension	Working distance range	DC voltage		Power cons.	Max LED fwd current	Forward voltage		Max pulse current	A	B	C
				min	max			typ.	max
		(mm x mm)	(mm)	(V)	(V)	(W)	(mA)	(V)	(V)	(mA)	(mm)
	1	2	3	4			5	6	7	8	9		10
LTCLCP144-GSpace-saving telecentric illuminator for LARGE FOV systems, minimun beam shape dimension 165 x 120 mm, green	green, 520 nm	165 x 120	170 - 350	12	24	< 2.5	350	3.3	4	2000	332.0	302.5	310.5	報價
LTCLCP192-GSpace-saving telecentric illuminator for LARGE FOV systems, minimun beam shape dimension 220 x 160 mm, green	green, 520 nm	220 x 160	230 - 450	12	24	< 2.5	350	3.3	4	2000	410.4	344.1	359.3	報價
LTCLCP260-GSpace-saving telecentric illuminator for LARGE FOV systems, minimun beam shape dimension 265 x 200 mm, green	green, 520 nm	265 x 200	270 - 500	12	24	< 2.5	350	3.3	4	2000	425.3	396.7	421.0	報價

注意

Opto Engineering® recommends green light for high precision measurement applications.
Beam shape is not circular.
Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 5% of the nominal value for maximum resolution and minimum distortion.
Tolerance ± 10%.
Used in continuous (not pulsed) mode.
At max forward current.
Tolerance is ±0.06V on forward voltage measurements.
At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).
Maximum dimension of the clamping flange.
Nominal value, with no spacers in place.

技術文件

數據表

XLS

相容產品

TC CORE PLUS series

Ultra compact LARGE FOV bi-telecentric lenses for matrix detectors up to 2/3”

TC3MHR-TC5MHR CORE PLUS series

超精簡型大視野遠心鏡頭, 最大支援 4/3” 探測器

LT2BC series

高均勻性連續 LED 背光源

LTBP 系列

高功率頻閃LED背光源

LTBC 系列

連續LED背光源

LTDV1CH-17V

1通道頻閃控制器，可變電流5 mA - 17A

規格

TC CORE PLUS telecentric lens.

Setup instructions 1

To build a telecentric measurement setup it’s necessary to position a LTCLHP CORE telecentric illuminator upside down with respect to the TC CORE PLUS telecentric lens.

LTCLHP CORE PLUS telecentric illuminator

Setup instructions 2

LTCLHP CORE PLUS telecentric illuminator is also a perfect solution when coupled with classic telecentric lenses (e.g. TC series).

應用實例

Integrated extruded aluminum profiles with M5 T-slot nuts allow for easy and cost-effective mounting.

The width of the beam rectangle is aligned along the A axis. The height of the beam rectangle is aligned along the B axis.

A, B an C indicate the mechanical dimensions of the illuminator.

在Vimeo頻道上尋找更多影片

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio